Craftmade MN44SS4 Installation Guide download pdf (Page 8)

page 7

Loosen the screws in the 2 slotted holes in the light

kit fitter (located on the underside of the motor

housing) and remove the other screw. Twist light kit

fitter and pull down carefully on light kit fitter in

order to remove.

[Note: Molex plugs MUST be disconnected BEFORE

removing the light kit fitter from the motor

housing. Molex plugs may be disconnected by

simply pulling them apart.]

Time Saver: Washers for blade screws can be set on

each blade screw prior to installing blades.

Locate 12 blade attachment screws and washers in

hardware pack. Slide a blade through one of the

narrow, rectangular openings on motor housing,

aligning holes in blade with holes in blade arm

(located on INSIDE of the underside of the motor

housing)--refer to drawing at right. Insert 3 blade

attachment screws (along with washers) and then

tighten screws securely with a Phillips screwdriver.

Repeat procedure for each remaining blade.

Note: Tighten blade arm screws twice a year.

8. Blade Assembly.

9. Light Kit Assembly.

Re-attach molex plugs by connecting BLACK wire

from motor housing to BLACK wire from light kit

fitter and WHITE wire from motor housing to

WHITE wire from light kit fitter. Be sure that molex

connections snap together completely.

Carefully arrange wiring within the fitter plate. Align

slotted holes in the light kit fitter with loosened

screws in fitter plate--be careful not to pinch wires or

molex connections between the light kit fitter and the

fitter plate. Twist light kit fitter to lock. Re-insert

screw that was previously removed. Tighten all 3

screws to secure light kit fitter.

fitter plate

molex

connections

light kit fitter

motor

housing

blade

blade attachment

screws and washers

molex

connections

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Comments to this Manuals

No comments

Craftmade MN44SS4 Installation Guide Page 8

Comments to this Manuals

Related products and manuals for Household fans Craftmade MN44SS4