Craftmade TR52 Installation Guide download pdf (Page 9)

page 8

9. Light Kit Assembly.

If you wish to USE the light kit, remove 1 screw

from motor plate on underside of motor housing

and partially loosen the other 2 screws. Align

slotted holes in fitter plate with loosened screws

in motor plate, allowing molex connections from

motor housing to come through hole in middle

of fitter plate. Twist fitter plate to lock. Re-insert

screw that was previously removed and securely

tighten all 3 screws with Phillips screwdriver.

Remove 1 screw from underside of fitter plate

and partially loosen the other 2 screws. Connect

BLACK (or BLUE) wire from motor housing to

BLACK wire from the light kit fitter and WHITE

wire from motor housing to WHITE wire from

light kit fitter. Make sure molex connections snap

together completely. Align slotted holes in light

kit fitter with loosened screws in fitter plate.

Twist light kit fitter to lock. Re-insert screw that

was previously removed and tighten all 3 screws

securely.

Install the 75-watt halogen bulb, type JD E11,

included.

Tip: Do not touch glass portion of bulb with fingers

or hands. Oil from skin can cause bulb to overheat

and go out prematurely. Use cardboard box or

foam wrapping bulb was packed with to layer

around glass portion of bulb.

Locate slots on glass shade and align with

nodules on inside of fitter plate. Gently push up

on glass shade and turn to the RIGHT (clockwise)

until it slides completely into place.

IMPORTANT: The glass shade must be removed

in order to replace the bulb. When replacing the

bulb, please allow bulb and glass shade to cool

down before touching, keeping in mind not to

touch the bulb itself as described above (see

"Tip").

If you do NOT wish to use the light kit, locate

slots on metal cover and align with nodules on

underside of fitter plate. Gently push up on

metal cover and turn to the RIGHT (clockwise)

until it slides completely into place.

CAUTION: Do not install the light kit fitter or the

bulb if you do NOT wish to use the light kit.

glass shade

bulb

fitter plate

metal cover

motor housing

motor plate

molex

connections

light kit fitter

slot

fitter plate

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments

Craftmade TR52 Installation Guide Page 9

Comments to this Manuals

Related products and manuals for Household fans Craftmade TR52