Craftmade HC42 User Manual download pdf (Page 3)

Step 1

Turn off circuit breakers and wall switch to the

fan supply line leads.

Warning: Failure to disconnect power supply prior to

installation may result in serious injury or death.To

reduce the risk of shock, this fan must be installed with

an isolating wall control/switch.

Step 2

Check to make sure blades are at

least 30” from any obstruction.

Check downrod length to

ensure blades are at least

7' above the floor.

84”

(2.1m)

Min.

30”

0.75m

Min.

Preparation

Important: When using an existing outlet box, be sure the box is securely

attached to the building structure and can support the full weight of the fan.

Failure to do so can result in serious injury or death.

Step 3

Prior to securing mounting bracket, screw "J" hook (S9) into ceiling

outlet box as a secondary support means. Secure mounting plate (1)

using screws and washers (S2) directly to the outlet box. If not mounting

to an outlet box, use wood screws (S1) and mount securely to a beam or

joist.

NOTE: Do not mount directly to sheet rock or ceiling tile.

NOTE: J Hook installation is a Canadian requirement only.

OUTLET BOX

Mounting Plate (1)

Support Beam

Ceiling

Wood Screws

& Washers (S1)

Screws & Washers

for Mounting Plate (S2)

“J” Hook (S9)

Step 4

Hang the fan motor/mounting bracket (2) onto the hook that is

positioned on the mounting plate (1).

Mounting Plate (1)

Fan Motor Mounting Bracket (2)

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments

Craftmade HC42 User Manual Page 3

Comments to this Manuals

Related products and manuals for Household fans Craftmade HC42